Skip to content
Sugar Land, TX · Monday to Thursday, 9am to 1pm and 2pm to 5pm. Friday, 9am to 12pm
Nguyen Accounting Group, Inc
Bookkeeping and QuickBooks

Contractor and Construction Accounting Cost in Houston: 2026 Guide

What drives Houston construction accounting cost in 2026: job costing, WIP, 1099 reporting, cleanup and Texas franchise tax.

Published Updated 8 min readBy Nguyen Accounting Group, Inc
Illustration: a construction hard hat and blueprints next to a job-costing ledger and calculator
Summarize this with AI

Key Takeaways

  • Ask for a written quote based on your own job count, sub count and the condition of your books, rather than relying on a published band.
  • Job costing and WIP schedules are work a contractor needs that a standard service business usually doesn't, and a crew of subs means a stack of 1099s.
  • For payments made in 2026, the 1099-NEC line for a subcontractor is $2,000, up from $600, and 2026 forms are due Monday, February 1, 2027 (IRS instructions).
  • Texas franchise tax: for 2026 and 2027 reports the no tax due threshold is $2,650,000, and a taxable entity such as an LLC or corporation under it still files an information report.
  • Individual returns at Nguyen Accounting Group start at $950.

What Moves a Houston Contractor's Accounting Quote in 2026

Short answer: it depends on your file, and a construction price band quoted before anyone has seen your books is a guess. No single figure fits a three-job remodeler and a commercial GC at the same time, so this guide doesn't print one.

What we can give you is a list to bring to any quote. Count your open jobs, the subs you pay each year, and the months your books are behind. Note whether any contracts run past year-end. Hand those over and ask each firm to price against them, so the quotes you compare cover the same work.

For dollar figures you can check, our Houston CPA pricing guide lists what other Houston-area firms publish on their own sites, labeled as their fees. If you want the non-construction baseline, the monthly bookkeeping cost benchmark covers a standard service business. The rest of this article explains why construction books take more work than either.

Why Construction Books Take More Work Than Regular Bookkeeping

A retail store has one question: did the business make money this month? A contractor has that question times every open job. Each job is its own little business with its own revenue, materials, labor, sub payments and equipment charges.

That multiplies the work. Every Home Depot receipt has to land on a specific job, not just in a materials bucket. Every sub invoice needs a job code. Payroll has to split across jobs when your crew works three sites in one week. A bookkeeper who codes everything to one big expense account isn't doing construction accounting. They're doing data entry.

There's also a timing problem most businesses never face. You collect deposits before work starts, buy materials weeks before you bill for them, and wait on retainage months after a job closes. That's how a contractor can show a profit on paper and still struggle to make payroll.

Job Costing: What It Is and What It Adds to the Work

Job costing means every dollar in and out gets tagged to a specific job. At any moment you can see, for example, that a kitchen remodel in Bellaire is at 62 percent of budget while an office buildout near the Galleria is running over on labor.

Setup means building a cost code structure in QuickBooks, mapping your estimate categories to those codes, and training whoever enters bills to tag them correctly. After that, the monthly work grows with your job count. A remodeler running three jobs needs far less of it than a commercial GC running a dozen with AIA progress billing.

Is it worth it? Without job costing, every job looks like the average of all of them. With it, you can see which jobs and which customers carry the business and which ones drag it down. Then you can reprice the weak ones or stop bidding them.

WIP Schedules and Percentage-of-Completion

If your jobs finish inside a month, you can skip this section. If you run contracts that span months, work-in-progress accounting is where your books either tell the truth or lie to you.

A WIP schedule compares what you've billed on each job against what you've earned based on costs incurred. An overbilled job has been billed ahead of the work. Once the customer pays, you're holding money you haven't earned yet, which feels great until the job finishes and the cash is gone. Underbilled jobs mean you're financing your customer's project.

If you use percentage-of-completion revenue recognition, tell whoever quotes your return. And WIP schedules built on unreconciled books are fiction. If your books and bank statements disagree by more than uncleared checks and deposits can explain, fix that first. Our guide to reconciliation drift before tax season covers how that happens and how to fix it.

1099 Subcontractor Handling and Compliance

Houston construction runs on subs, and subs mean 1099s. For payments made during 2026, you file a 1099-NEC for each person you paid at least $2,000 for services in the course of your business who isn't your employee. The payee has to be an individual, partnership or estate, or in some cases a corporation, and payments made by credit card or through a third-party network are reported on Form 1099-K by the payment company instead. That line was $600 until it rose to $2,000 for tax years beginning after 2025, per the IRS instructions for Forms 1099-MISC and 1099-NEC.

The form is due January 31. Under the same IRS instructions, when that date falls on a weekend or legal holiday the due date moves to the next business day, so 2026 forms are due Monday, February 1, 2027.

The form is the easy part. Get the W-9 right early. The IRS page on Form W-9 explains that it gives you the sub's correct taxpayer identification number, which you need to file their 1099. Collect it before the first check goes out, not in a January scramble after the sub has moved on.

If you're already behind on the payroll side, our article on why the IRS treats payroll tax debt differently explains what you're facing. Under the IRS trust fund recovery penalty rules, that penalty can be assessed personally against a person who is responsible for paying withheld taxes and willfully fails to.

Setup, Cleanup, and Catch-Up Work

If you're calling an accountant with books that are already behind, with months of uncategorized transactions and jobs that were never tracked separately, expect cleanup before monthly work.

Cleanup is quoted as a project, and three things move it. How many months are behind. Whether personal and business spending ran through the same accounts. Whether you need job history rebuilt from bank statements and sub invoices, or just the books brought current.

A fresh setup for a new contracting business is a smaller job: chart of accounts, cost codes, payroll connection and bank feeds. If you're just starting out, do it properly the first time. Setting up cost codes on day one is far less work than rebuilding a year of job history later.

Tax Prep: The Other Half of the Bill

Monthly accounting is only part of what you pay. For a Houston contractor run as a sole proprietor, the IRS sole proprietorship page puts business income on Schedule C with the individual Form 1040, and individual returns at Nguyen Accounting Group start at $950. For business returns, our pricing guide shows what other Houston-area firms publish.

One Texas-specific note: franchise tax. For 2026 and 2027 reports, the Texas Comptroller sets the no tax due threshold at $2,650,000, up from $2,470,000 for 2024 and 2025. It applies to taxable entities: the Comptroller's franchise tax overview lists corporations and LLCs, including single member LLCs, as subject to the tax, and says sole proprietorships (other than single member LLCs) don't file or pay it. A taxable entity under the threshold owes no franchise tax, but the filing requirements page says it still files a Public Information Report or an Ownership Information Report. Above it, a cost of goods sold deduction means filing the Long Form, because the EZ Computation doesn't allow margin deductions. Our Texas franchise tax guide covers the rest.

How to Keep Your Accounting Bill Reasonable

You control more of this cost than you think. The biggest driver of accounting work is the condition of what you hand over. A contractor who snaps receipts into QuickBooks every week hands over a file that takes far less fixing than a shoebox delivered in April.

Three habits help most. First, one business bank account and one business credit card, nothing personal running through either. Second, collect the W-9 before the sub's first check, every time. Third, tag the job on every transaction the day it happens, because rebuilding job codes three months later is slow, expensive work.

Also match the service to your size. A small handyman operation doesn't need a monthly WIP schedule. A GC running long commercial contracts usually does. Paying for reports you don't use is waste, and skipping reports your bonding company or bank asks for costs you in a different way. A firm that works with contractors should tell you which reports you need instead of selling you the biggest package.

Frequently Asked Questions

How much does a construction accountant cost per month in Houston?

It depends on how many jobs you run, how many subs you pay and what shape your books are in, so get a written quote for your own file. We don't publish a construction price band, because no figure we could source would fit both a three-job remodeler and a commercial GC. Our Houston CPA pricing guide shows what other Houston-area firms publish, labeled as their fees, and individual returns at Nguyen Accounting Group start at $950.

Why does construction accounting take more work than regular bookkeeping?

Every job is tracked like its own small business. A standard service company needs one profit and loss. A contractor needs company-level financials plus job-level costing, so every receipt, sub invoice and payroll hour gets coded to a specific job. Add WIP schedules for contracts that span months, retainage, customer deposits and 1099s for subs, and there's more to do each month at the same revenue. What that work buys you is knowing which jobs make money and which don't.

What does job costing setup involve for a Houston contractor?

Building a cost code structure in QuickBooks, mapping your estimate categories to those codes, connecting bank and card feeds, and training whoever enters bills to tag each one to a job. If your existing file has months of untagged history, rebuilding it is a separate cleanup job. You can rebuild only the current year and start clean from there. Ask for the setup and any rebuild to be quoted separately.

When do I have to send a subcontractor a 1099-NEC?

For payments made during 2026, the IRS instructions for Forms 1099-MISC and 1099-NEC set the line at $2,000: you file a 1099-NEC for each person you paid at least $2,000 for services in the course of your business who isn't your employee. The payee has to be an individual, partnership or estate, or in some cases a corporation, and card or third-party network payments go on Form 1099-K instead. Before 2026 the line was $600. The form is due January 31, and because January 31, 2027 is a Sunday, 2026 forms are due Monday, February 1, 2027. Collect a Form W-9 before the first check so you have the sub's correct taxpayer number when January comes.

Do I need WIP accounting for my construction business?

Only if your jobs run long enough that billing and costs land in different months, or cross year-end. If you finish work inside a month and bill straight away, job costing covers you. Once you take deposits, bill on progress or hold contracts past year-end, a WIP schedule is how you see whether each job is overbilled or underbilled. Overbilled means you've billed more than you've earned so far, and once those invoices are paid you're holding cash you haven't earned yet. Underbilled means you've earned more than you've billed, so you're financing the customer's project. Banks and bonding companies may also ask for WIP schedules when you go after larger commercial work.

What does it cost to clean up messy contractor books?

It's quoted per project, and what moves the quote is how many months are behind, whether personal and business spending are mixed, and whether you need job history rebuilt or just the books brought current. Get the cleanup done before tax season rather than during it. If QuickBooks and your bank statements disagree by more than uncleared checks and deposits can explain, that reconciliation drift is the first thing to fix, because reports built on it can't be trusted.

Can I just use QuickBooks myself instead of hiring an accountant?

You can, especially with short jobs and few subs. As of late October 2026, the QuickBooks Online pricing page listed paid plans from Simple Start at $38 a month to Advanced at $340 a month, before promotions. The wheels tend to come off at three points: when you start paying subs and owe 1099s, when jobs run long enough that billing and costs land in different months, and when you stop having time to code transactions every week. A middle path: you enter bills and tag jobs, and an accountant reconciles monthly and handles compliance.

Talk to a Houston CPA

Nguyen Accounting Group serves Houston small businesses with tax preparation, tax resolution, and bookkeeping. See how our tax preparation services and bookkeeping and QuickBooks support work, or Book Your 15-Minute Intro Call. 15 minutes to get to know you and see if working together makes sense.

Want the numbers handled properly?

Bookkeeping, QuickBooks, payroll, tax and IRS help for small businesses in Sugar Land, across Fort Bend County and the Houston area.

You run your business. We will handle the rest.

15 minutes to get to know you and see if working together makes sense.

Call NowBook Your 15-Minute Intro Call